Inherently stable sputtering process

The principal difference between the sputtering process and evaporation is the mechanism of extracting molecules from the target material. The possibility of material sputtering is very much enabled by ion grid optics that can precisely control ion energy and beam focus. When the proper energy of ions is chosen in order to minimize ion implantation (typically 1000-2000eV) and they are precisely directed to the target material, desired atoms or molecules are knocked out from their stable positions by multiple collisions and can leave the target. Such interaction between ion beam and the target is called sputtering. Electrons, produced by RF neutraliser and directed to the ion beam, serve a dual purpose: 1) prevent spreading of the beam due to the repulsion among ions; 2) prevent electrical discharges in the chamber by neutralising overall beam charge. Since the ion gun is isolated as a separate device in the chamber, ion beam energy and ion density are very well controlled parameters. A very stable ion beam combined with high vacuum (~1×10-4 mbar during the deposition) and ultra-high purity metal targets (>99.99%) result in a super stable deposition process. It enables a fully automatic deposition and the ability to precisely control refractive indices and thicknesses of each deposited layer.

 

Bulk-like packing density

A sputtered particle (atom or molecule) has times more energy (typically in the range of 10’s eV) than the evaporated one. In such a scenario, particles condensing on the surface are extremely mobile and can easily move across the surface, penetrate and mingle between the already deposited particles. Such film growth does not require additional heating of the substrate and thus creates a very densely packed and completely amorphous structure. Due to the bulk-like layer’s density, IBS coatings are completely immune to mechanical wear as well as changes in ambient temperature and humidity and ensure smooth operation of your laser in any circumstances. Moreover, our coatings may be used in harsh environments and even in outer space with no change in performance!

 

Scattering? What’s that?

 

Do you notice any difference in the pictures on the left? The upper one depicts the surface roughness that you will get by using optics from OPTOMAN. Due to the near-bulk IBS coating density, the surface roughness of the coated component is mainly determined by the initial substrate roughness. Combine this with the completely amorphous coating layers and you will end up with almost scatter-free optics!

 

 

 

 

Forget short duty cycle issues!

 

A high and stable vacuum during the process, a large chamber size, extremely pure target materials, near bulk coating density, spatially separated sputtering and material condensation processes which reduce ion implantation to minimum – these are the main reasons why IBS coatings exhibit very low absorption losses. It is well known that such losses are the main cause of thermal effects and a low duty cycle. If you use high repetition rate fs, or a CW system and longevity is your concern, give our coatings a try and you will be surprised!

 

 

High resistance to laser irradiation

 

Laser-induced damage of optical components is one of the biggest headaches for high power laser manufacturers. Coating layers deposited by Ion Beam Sputtering are very dense and pure. By choosing proper deposition parameters and ensuring cleanliness in every step of the manufacturing chain, we are able to produce coatings with very low defect densities. That is the reason why our IBS coatings exhibit excellent resistance to laser irradiation!

 

 

 

Cutting edge spectral requirements and repeatability

 

OPTOMAN is equipped with state-of-the-art broadband optical monitoring. This enables precise layer termination and, together with on-the-fly reverse engineering equipment, allows OPTOMAN to deposit even the most complex non quarter wave designs and ensure repeatability between different coating batches. Combination of the advanced optical monitoring and exceptionally low total losses is the reason why we can offer you coatings with cutting edge spectral requirements!

 

 

 

 

Is Ion Beam Sputtering perfect?

Since there are no ideal things in the real world, Ion Beam Sputtering is not an exception. The main drawbacks of this deposition technique are listed below:

 

  • Lower deposition rates (in comparison with evaporation)
  • Smaller substrate volume per run (in comparison with evaporation)
  • High compressive coating stress (~500 MPa) (however, initial substrate flatness may be maintained by process optimization or additional manufacturing steps)

 

Having said that, Ion Beam Sputtering is still the best choice for the most demanding laser applications, and by exploiting this deposition technique, OPTOMAN is ready to solve your coating problems for good!

 

#PhotonMission #OPTOMAN #LaserOptics #IBS #enlightenedbyPM

Original article